A leave balance in Xero Payroll UK usually looks wrong for one of a handful of reasons: an opening balance that was not carried across, a leave year that does not match the contract, bank holidays counted twice, part-time hours set up as full time, or leave taken before it was earned. Work out what the balance should be by hand first, then compare. The gap between the two usually points straight at the cause.
Key points
- Start by working out the expected balance yourself. You cannot judge "wrong" without a target.
- Xero said on 27 November 2025 that leave balances can be viewed on individual payslips or each employee's leave tab.
- Xero announced on 18 June 2024 that UK leave can accrue from a custom date.
- Xero said on 6 November 2025 that days are shown where the employee has a consistent working pattern. Otherwise you may see hours only.
- A Xero admin explained on 25 November 2025 that holiday groups add a bank holiday line to the payslip. A user idea says this does not reduce the annual entitlement.
- Leave year systems and monthly accrual systems give very different balances part way through a year. Both can be lawful.
- Fix the cause, not just the number, and keep a dated note of what you changed.
Step 1: Work out what the balance should be
Before you touch anything in Xero, write down:
- The employee's entitlement for the year, from the contract. The legal minimum is 5.6 x days worked per week, capped at 28 days.
- Whether bank holidays are included in that figure.
- When the leave year starts.
- Whether leave is all available at the start of the year, or builds up through the year.
- Any days carried over from last year.
- Leave taken so far this year, with dates.
Our holiday entitlement calculator helps with the first item. Our guide to holiday entitlement in Xero covers the rules behind it.
Now you have an expected balance to compare with Xero's.
Step 2: Find where Xero shows the balance
Xero staff said on the product ideas forum on 27 November 2025: "Currently the options for viewing this information is via individual payslips or within each employee's leave tab." Xero's UK payroll features page also says employees can "check leave balances" in Xero Me.
A payslip shows a balance as at that pay date. If you compare a payslip from last month with the leave tab today, any leave taken or built up since then will make them look different. Always note which date each figure refers to.
Symptoms and likely causes
| What you see | Likely causes to check |
|---|---|
| Balance too high | Bank holidays not deducted, leave not recorded, full-time entitlement on a part-timer, carry over added twice |
| Balance too low | Opening balance missing, bank holidays deducted twice, wrong leave year start |
| Balance negative | Leave taken in advance of accrual, wrong accrual method |
| Balance not showing in days | No consistent working pattern set |
| Balance not going up | Accrual date, accrual method, no hours recorded for an irregular-hours worker |
| Balance resets on the wrong date | Leave year or accrual date does not match the contract |
The checklist
Work down this list in order. Stop when you find the cause.
1. Opening balance
If the employee joined part way through a leave year, or you moved payroll to Xero part way through, the balance they had before needs bringing across. If it was missed, everything since will be out by that amount.
Check: compare Xero's balance with your figure from Step 1. If the difference equals what they had on the day you moved to Xero, this is the cause. For how to enter an opening leave balance, check Xero's help centre.
2. Leave year start and accrual date
The leave year in Xero needs to match the contract. If the contract year starts on 1 April and Xero's starts on 1 January, the balance will reset at the wrong time.
On 18 June 2024 Xero announced on its forum that UK Payroll users can "set employee's leave to accrue based on a custom date of your choosing", and that leave "will now accrue on the first day of your annual accrual method". If an employee's setup predates that change, it is worth checking what date they are on.
3. Bank holidays
This one comes up on Xero's own forum.
On 25 November 2025 a Xero admin explained that if an employee is assigned to a holiday group, Xero adds a bank holiday earnings line to the payslip and reduces ordinary hours by that amount. The idea that prompted the reply says the holiday group does not reduce the annual leave allowance, so the allowance is overstated where the contract includes bank holidays.
For contracts with 28 days including bank holidays, Xero's reply suggested either entering a reduced annual leave entitlement, for example 20 days if 8 bank holidays are included, or not assigning the employee to a holiday group and treating bank holidays as part of their regular annual leave.
Check: does the contract include bank holidays in the entitlement? If yes, and the employee is in a holiday group, is the entitlement reduced to match? Our bank holidays guide covers part-timers, where the number of bank holidays that land on their working days varies.
4. Part-time hours and working pattern
A part-time employee set up with a full-time entitlement will have a balance that is too high. A 3-day worker's statutory minimum is 16.8 days, not 28.
Xero said on 6 November 2025 that payroll admins can see leave in weeks, days and hours "where the employee has a consistent working pattern set up". If the balance only shows in hours, or the days figure looks odd, check the working pattern first.
Also check the hours per day. If leave is held in hours and the working pattern says 8 hours a day for someone who works 6, a "day" of leave will take off too much.
5. Accrual method
gov.uk says employers can use a leave year or an accrual system for regular-hours workers. For irregular-hours and part-year workers with leave years starting on or after 1 April 2024, gov.uk says employers must use a specific accrual system, with entitlement of 12.07% of hours worked in each pay period.
That means an irregular-hours worker with no hours recorded in a period builds up no leave for that period. If someone's balance is "not accruing", check that their hours are reaching payroll. How hours flow from timesheets into leave accrual in Xero is a detail to check in Xero's help centre.
6. Leave taken in advance
If an employee has taken more leave than they have built up so far, a balance can go negative under an accrual system. That is not always an error. It can be the correct result of the method you chose. Decide whether you allow it, and write the rule down.
7. Leave not recorded, or recorded twice
Check the leave tab against your own list from Step 1. Look for a holiday that was taken but never entered, or one entered twice, for example once as a leave request and once by hand.
8. Carry over
gov.uk says that if a worker gets 28 days' leave, they can carry over a maximum of 8 days. Check whether carried-over days were added, and only once.
Worked example: same employee, two "right" answers
Mo started on 1 January 2026 and works 3 days a week, so 2026 is Mo's first leave year. The contract gives the statutory minimum, which is 3 x 5.6 = 16.8 days a year. The leave year runs January to December. By the end of June Mo has taken 6 days.
| Method | Available by end of June | Taken | Balance |
|---|---|---|---|
| Leave year system (all available from the start) | 16.8 | 6 | 10.8 |
| First-year monthly accrual (one-twelfth a month) | 16.8 x 6/12 = 8.4 | 6 | 2.4 |
Both figures are correct for the method used. If you expected 10.8 and Xero shows 2.4, nothing may be broken. The method in Xero may simply be different from the one in the contract. That is a setup question, not a data error.
The sums: 16.8 - 6 = 10.8, and 16.8 x 6 / 12 = 8.4, then 8.4 - 6 = 2.4. These are before rounding. Mo is in the first year of employment, and Acas says part days must then be rounded up to the nearest half day. That makes the leave year figure 17 days (balance 11) and the monthly accrual figure 8.5 days (balance 2.5).
When you have found the cause
- Write down the balance you expected, the balance Xero showed, the cause and the date.
- Fix the setting that caused it, if it is a setting.
- Correct the balance, if it still needs correcting. Check Xero's help centre for how to adjust a balance.
- Check the next payslip to make sure the fix held.
- Check whether the same cause affects other employees. Setup issues are rarely one-offs.
From 6 April 2026, gov.uk says employers must keep detailed records of annual leave and holiday pay for at least 6 years. Your note of what you changed is part of that record. Our holiday pay records guide explains the rule.
Checking everyone at once
Because Xero shows balances per employee, checking the whole team means opening each leave tab or payslip in turn. A Leave Balances report for UK Payroll had 184 votes on Xero's forum when we checked on 16 November 2026, and Xero said on 27 November 2025 that it "isn't on our immediate roadmap". Our Xero leave balance report guide covers the workarounds.
Common mistakes
- Overwriting the number without finding the cause. The same error comes back next pay run.
- Comparing a balance from one date with a figure from another. Payslips are a snapshot.
- Assuming a negative balance is a bug. Under an accrual system it may be expected.
- Counting bank holidays twice. Check the contract and the holiday group together.
- Leaving a part-timer on 28 days. The minimum is 5.6 x days worked.
- Fixing one employee only. If the cause is a setup choice, others are probably affected.
- Not keeping a note. Records of leave must now be kept for 6 years.
Balances and pay are separate checks
A correct balance does not show whether each holiday was paid at the right rate. Holiday Pay Check connects to Xero Payroll with read-only access, works out the 52-week average for each holiday taken, compares it with what was paid and shows the workings. It never edits anything in Xero, so fixes stay with you.
Sources
- gov.uk, "Holiday entitlement: Entitlement": https://www.gov.uk/holiday-entitlement-rights/entitlement
- gov.uk, "Holiday entitlement: Calculate leave entitlement": https://www.gov.uk/holiday-entitlement-rights/calculate-leave-entitlement
- gov.uk, "Holiday entitlement: Holiday pay": https://www.gov.uk/holiday-entitlement-rights/holiday-pay
- Acas, "How much holiday someone gets": https://www.acas.org.uk/checking-holiday-entitlement
- Xero UK, payroll features: https://www.xero.com/uk/accounting-software/payroll/features/
- Xero product ideas, "UK Payroll - Leave Balances Report": https://productideas.xero.com/forums/967118-payroll-expenses/suggestions/45925522
- Xero product ideas, "UK Payroll - Adjust dates for holiday / statutory leave year": https://productideas.xero.com/forums/967118-payroll-expenses/suggestions/45084736-uk-payroll-adjust-dates-for-holiday-statutory
- Xero product ideas, "UK Payroll - Show leave balances in days and hours": https://productideas.xero.com/forums/967118-payroll-expenses/suggestions/45038362
- Xero product ideas, "UK Payroll - Bank holidays to automatically deduct from annual entitlement": https://productideas.xero.com/forums/967118-payroll-expenses/suggestions/50608196-uk-payroll-bank-holidays-to-automatically-deduct
Xero is a trademark of Xero Limited. This guide is general information, not legal advice.
Questions
Why is my employee's leave balance wrong in Xero?
The usual causes are an opening balance that was not brought across, a leave year or accrual date that does not match the contract, bank holidays counted twice or not at all, part-time hours set up as full time, or leave taken before it was built up. Work through each one before you change the balance.
Why is the leave balance not showing in days in Xero?
Xero said on 6 November 2025 that payroll admins can see leave in weeks, days and hours where the employee has a consistent working pattern set up. Without one, you may only see hours. Employees can see balances in hours and days in Xero Me.
Why is annual leave not accruing in Xero?
Check the accrual date first. Xero announced on 18 June 2024 that UK leave can accrue from a custom date and that leave accrues on the first day of your annual accrual method. For irregular-hours workers, leave builds up from hours worked, so no recorded hours means nothing builds up. For anything else, check Xero's help centre.
Where can I see an employee's leave balance in Xero Payroll UK?
Xero said on 27 November 2025 that the options for viewing leave balances are individual payslips or each employee's leave tab. Employees can also check their balance in Xero Me. There is no UK report that lists every employee's balance at once.
Should I just overwrite a wrong balance?
Not before you know why it is wrong. If the cause is a setting, a manual fix will be undone or repeated next pay run. Write down the balance you expected, how you worked it out and the date, then fix the cause. Keep that note, because holiday records must now be kept for 6 years.
General information about UK holiday pay, not legal advice. For a specific case, speak to Acas or your payroll provider.



